Driveshaft Shop 1997-2000 C5 6-Speed Manual and Automatic 3″ Aluminum Driveshaft (Torque Tube) 10mm bolts Relocation Brackets Note: Our crossmember is designed

Note: Our crossmember is designed off of Speed Engineering's LS motor mount plates set in the furthest back location and works with a variety of transmissions

On Car Adjustable Heim Joints

Note: Crossmember is 30" in total length

We found the bars and internals are closer to the C7 corvette or maybe the CTS-v axles in the fact that not only the internal splines are much larger but the CV parts themselves are

Note: This crossmember is a standard lightweight 4L60E replacement crossmember

Driveshaft Shop 1997-2000 C5 6-Speed Manual and Automatic 3″ Aluminum Driveshaft (Torque Tube) 10mm bolts Relocation Brackets Note: Our crossmember is designedProduct Description: Our new torque tube driveshaft is made from 3 x. 125 wall 6061 T6 aluminum and uses our own custom machined ends. This will ensure that the shaft will not distort or break like the factory units. The factory shaft is made from a smaller tube (there are 2 different types) and will flex and actually bend during hard acceleration, causing the rubber drives to wear out prematurely. Available for C5 and C6 applications, and can also be