Time-Sert 48196 M18x1.5 Taper Seat Cutter Short Shop By Category > Measurement>Tire Thread Depth Gauge GMC TopKick C-Series (Conventional) C4/C5

GMC TopKick C-Series (Conventional) C4/C5 model years 2003 ¸ 2004 ¸ and 2005

birth defects or other reproductive harm

The Mopar 9706A Rear Main Seal Installer is used in the following engine families and platforms:

CTC5-530-381

Failure to use GM-46091-5 will result in misdiagnosis of the intake and charge air cooler

Time-Sert 48196 M18x1.5 Taper Seat Cutter Short Shop By Category > Measurement>Tire Thread Depth Gauge GMC TopKick C-Series (Conventional) C4/C5Time Sert 48196 M18x1. 5 Taper Seat Cutter Short For use on some Taper Seat spark plug repairs that have very limited access to the hole. Note: you would need the tap found in the spark plug repair kit P N 4815 to use the tool. Tool will only cut the taper seat counterbore. Be aware the reduced step stop on this tool is very small so do not use too much down pressure. The reduced step stop approximately found 2mm from front of tool. For the Time Sert